MAGNETS AND CLAMPS


$55 incl gst


STRONGHAND 2PC CORNER MAGNETS



  • Time saving magnetic tools for use in the shop & in the field.
  • Create 90° corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
  • One side corner "relief" provides clearance for tall lips.
  • Use the outer edges of the Corner Magnet for setting up materials at 60° and 120°.
  • Max. Pull Force: 30 LBS (14kg)
  • Dimensions: 83 x 95 x 16 mm
$142 incl gst


STRONGHAND 75KG ADJUST-O MAGNET SQUARE

  • The fast & easy way to hold metal workpieces at 45° & 90°.
  • Turn the magnet Off when setting up, turn On when you're ready to work. Fast and safe set-up!
  • Ideal for round and square tubing, angle, and flat stock.
  • Easy to clean. Simply turn Off and wipe.
  • Max Pull Force: 75kg
  • Dimensions: 152 x 130 x 35mm

$212 incl gst


STRONGHAND 2 AXIS 95mm WELDERS ANGLE CLAMP




  • Made with machined cast iron
  • Machined outside faces - usable for upright joint
  • Stand-off increases access
  • Quick acting screw
  • Slot Size: 30mm x 11mm wide
  • Miter Joints: 95mm
  • Jaw Length: 122mm
  • T-Clearance: 62mm
  • Jaw Height: 35mm
$75 incl gst


STRONGHAND 40KG ADJUST-O MAGNET SQUARE


  • The fast & easy way to hold metal workpieces at 45° & 90°.
  • Turn the magnet Off when setting up, turn On when you're ready to work. Fast and safe set-up!
  • Ideal for round and square tubing, angle, and flat stock.
  • Easy to clean. Simply turn Off and wipe.
  • Max Pull Force: 40kg
  • Dimensions: 111 x 95 x 29mm
$25 incl gst


STRONGHAND MINI 2PC MULTI ANGLE MAGNET

  • At just 2-5/16" in height, Mini Magnets provide low profile holding of stock in tight, hard to reach areas.
  • Use as many as needed for light duty holding of stock at multiple points for greater accuracy in fixturing with odd-shaped stock.
  • Perfect for use around the shop, and compact enough to carry along for use out in the field.
  • Angles: 30°, 60°, 45°, 90°
  • Max Pull Force: 25 LBS (10kg)
  • Dimensions: 59 x 50 x 16mm
  • Twin pack
$355 incl gst

STRONGHAND 3 AXIS 95mm WELDERS ANGLE CLAMP




  • Holds a 3-axis workpiece in position before welding.
  • Features the Quick Acting Screws and "Swing Away" Arm.
  • Hold parts in position during cool down to minimize distortion due to contraction.
  • Two Quick Acting Screws.
  • "Swing away" the 3rd Axis arm for quick and easy part removal.
  • Slot Size: 30mm x 11mm wide
  • Miter Joints: 95mm
  • Jaw Length: 122mm
  • T-Clearance: 62mm
  • Jaw Height: 35mm